全自動封膠機生產能力高的特點廣泛用于電源膠并能確保替換自動化程度高、生產能力高的特點,廣泛用于電源膠， 電源膠機主要用于:電源、LED電源,防水電源,路燈驅動電源,防水電源,電源適配器。

　　The characteristics of automatic sealing machine is widely used in high power production capacity of glue and can ensure that the replacement characteristics of high degree of automation, high production capacity, widely used in power supply power machine is mainly used for glue, glue: power supply, LED power supply, water supply, street lamp driver, waterproof power, power source adapter.

　　1、程序迅速調整:在配藥機控制系統,并可以存儲超過999工作軌跡圖形,簡單地選擇操作簡單,可以快速適應不同的工件,機器系統可以自動訂單方向改革,自動重復路徑檢測、自動倒角處理,平滑處理。

　　1, the program quickly adjust: in the control system of dispensing machine, and can store more than 999 track graphics, simply select the simple operation, can quickly adapt to different workpiece, the machine can automatically order direction, automatic repeat path detection, automatic chamfering processing, smoothing processing.

　　2、動態混合攪拌系統:吐出槍部分泄漏防止閥,可有效地防止泄漏;正負1%的準確率。

　　2, dynamic mixing system: spit gun part of leakage prevention valve, can effectively prevent leakage; plus or minus 1% accuracy.

　　3、機器很容易調整,可以在一定范圍內滿足不同高度的需求工件,并能確保替換。

　　3, the machine is easy to adjust, you can within a certain range to meet different levels of demand for the workpiece, and can ensure replacement.

　　4、進料桶使用不銹鋼:AB增值稅的動態混合,材料缸可以加熱,外部加熱裝配,數字顯示,溫度可調;

　　4. The feeding barrel is made of stainless steel: AB dynamic mixing of VAT, material cylinder can be heated, external heating assembly, digital display, temperature adjustable;

　　全自動點膠機膠閥滴漏經常發生于膠閥關畢以后，95%的此種情形是因為使用的針頭口徑太小所致。

　　Full automatic dispensing machine glue valve leakage often occurs after the rubber valve closed, 95% of this case is due to the use of needle caliber is too small.

　　一般利用控制全自動點膠機混合管長度與控制壓桿分別來決定膠水混合程度和控制膠水通斷。

　　Generally, the length of the mixing tube and the control pressure bar are respectively determined by the length of the mixing pipe and the control pressure bar, and the glue is switched on and off.

　　混合管的混合方式為靜態混合，由一連串左右旋葉片相互垂直排列在套管內組成，A、B膠水經過混合管時進行連續的切割與重合為均勻的混合液。混合管出口部可接轉接頭，方便使用任何口徑的針頭，以保證出膠量精確。

　　The mixing mode of the mixing tube is a static mixing, and a series of left and right rotating vanes are arranged vertically in the casing, and the A and B glue are continuously cut and overlapped to be a uniform mixing liquid through the mixing tube. The outlet of the mixing pipe can be connected with a switch head, so that the needle with any caliber can be conveniently used, so as to ensure the exact amount of the glue output.

　　針筒放入針筒夾持器后并固定就可以連接氣閥了。將點膠控制器的AIR OUT口通過氣管連接到針筒，并把針筒氣閥連接到點膠控制器的AIRIN。將點膠機的‘點膠’接口通過電纜線連接到點膠控制器的信號輸入接口。

　　The needle into the needle collet holder can be connected and fixed valve. Connect the AIR OUT port of the dispensing controller through the trachea to the syringe and connect the syringe valve to the AIRIN of the dispensing controller. The "dispensing" interface of the dispenser is connected to the signal input interface of the dispensing controller through the cable.

　　以上便是雙組份打膠機的分享，您還滿意嗎，歡迎關注我們的網站:http://m.yalais.com/并且關注我們的產品，我們將為您提供優良的產品，衷心的愿與您建立合作關系。

　　The above is a two-component glue machine to share, you still satisfied with it, welcome to our website: http://m.yalais.com/ and pay attention to our products, we will provide you with excellent products, sincerely wish to establish business relationship with you.