當前位置：結構膠固化后的強度下降會影響打膠效果
時間：2018-05-08 來源：http://m.yalais.com/ 發布人：昌盛機械
雙組分硅酮結構膠是由主劑A組分(白膠)和固化劑B組分(黑膠)組成，通過雙組分打膠機，按廠家推薦的比例混合均勻后使用。
The double component silicone structure adhesive is composed of the main agent A component (white glue) and the curing agent B component (black glue). It is used by the proportion of the manufacturer recommended by the manufacturer.
混合后的結構膠經過一段時間固化，終獲得好的粘接性能和物理性能。但是，如果結構膠混合不均勻后使用，結構膠固化就會出現質量問題。
After a certain period of time, the mixed structural adhesive solidified, resulting in good adhesion and physical properties. However, if the structure glue is not evenly distributed, the quality of the structural adhesive will be serious.
結構膠混合不均勻，局部會出現白色條紋。在光線比較亮的情況下，更加容易觀察。
The structure glue is not evenly distributed and white stripes will appear locally. It is easier to observe when the light is brighter.
混合不均勻和混合均勻的情況，結構膠混合不均勻，會出現什么問題呢?結構膠固化后的強度下降，固化交聯不完全、嚴重時候會發粘，無法固化等。
When the mixing is not uniform and the mixing is uniform, what will happen to the uneven mixing of the structure glue? The strength of the structure glue after curing is decreased, the curing crosslinking is not complete, it will be sticky in serious time, and can not be cured.
斷續有規律花膠：與系統性故障有關，如配比泵密封泄漏或者比例架磨損;
Intermittent regular pattern: related to systemic failure, such as leakage of proportional pump or wear of proportional frame.
本文的精彩內容來自雙組份打膠機詳細內容請點擊我們的官方網站:http://linshi.jncsjx.com謝謝您的到來!
The highlights of this article are from two groups of glue dispenser. Please click on our official website: http://linshi.jncsjx.com thank you for coming.
- 中空玻璃打膠機，助您開啟高效生產新時代！ 2026/02/19
- 中空玻璃生產線打膠機傳送V帶不平衡？這樣調，傳送平穩不跑偏 2026/02/13
- 中空玻璃生產線打膠難題：壓力夠卻打不滿膠？這樣排查就解決 2026/02/12
- 全自動封膠線實操科普：山東昌盛板壓段，筑牢封膠質量核心防線 2026/02/10
- 中空玻璃生產線實操科普：小玻璃清洗機反轉打滾？這樣解決最省心 2026/02/06
- 全自動封膠線實操科普：白膠泵密封圈這樣換，杜絕漏膠保順暢 2026/02/04
- 雙組份打膠機實操科普：出膠體這樣保養維護，延長壽命保順暢 2026/02/02
- 中空玻璃生產線：清洗機這樣保養，清潔高效更耐用 2026/01/30
- 全自動封膠線實操科普：板壓壓合效果差？四角落差這樣調精準 2026/01/28
- 雙組份打膠機實操科普：黑膠泵過濾這樣清洗，避免堵塞保順暢 2026/01/27
產品分類Product categories
聯系我們Contact us
